PAINT & SUNDRIES
STEP - FIBERGLASS
Price: Low to High
Price: High to Low
10 per page
20 per page
40 per page
60 per page
100 per page
Louisville FS2006 Commercial Step Ladder, 250 lb, 3 in Non-Conductive Rail
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 6200 Single Sided Step Ladder, 300 lb, 4-1/2 in, 3-1/8 in Front X 1-3/4 in Rear
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
Louisville FS1505 Extra Heavy Duty Step Ladder, 300 lb, 3 in Non-Conductive Rail
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner Old Blue Single Sided Step Ladder, 375 lb, 3 in, 3-1/8 in Front X 1-7/8 in Rear
Customized HolsterTop with lock-in accessory system secures tools from falling. Convenient conduit cutting system. Built-in wire spool holders allow for even pulling from both large and small spools. Rugged professional grade bracing. 3 ToolLasso included. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide.
Dyson Lumber Company, Inc.. All Rights Reserved.